Hytera PD78X User Manual

Operation:
1. Press the programmed Emergency key to send alarm information.
The radio displays the icon
and text information “Sending Alarm”, with red LED glowing. (None: If “Local Emergency Alarm” is
enabled via the programming software, an alarm tone will sound.)
2. When the icon
appears, you can speak into the microphone to make an emergency call.
3. When the icon
appears, you can receive. And when a call is received, the icon
appears.
4. If the preset Voice Cycles expire, you can hold down the PTT key to make the emerge
ncy call again
(the radio displays the icon
, with red LED glowing). After the emergency call is transmitted,
release the PTT key to receive (the radio displays the icon
, with LED flashing orange rapidly).
And when a call is received, the icon
appears. (HDC1200 only)
Two methods are available for you to exit the Emergency mode:
1. After the preset Alarm Cycles and V
o
ice Cycles expire, the radio will exit the Emer
gency mode
automatically
. (None)
2.
Long press the programmed Emergency key.
 Call Only (HDC12
00)
Operation:
1. Press the programmed E
mergency key to go to the Reve
rt Channel, and the radio displays the icon
.
2. If the feature “Alarm with Call to Follow” is enabled, you can speak into the microphone to make an
emergency call when the
radio displays the icon
.
3. When the icon
appears, you can receive. And when a call is received, the icon
appears.
31
4. If the preset Voice Cycles expire, you can hold down the PTT key to make the emergency call again
(the radio displays the icon
, with red LED glowing). After the emergency call is transmitted,
release the PTT key to receive (the radio displays the icon
, with LED flashing orange rapidly).

Hytera PD78X Specifications

General

Brand	Hytera
Model	PD78X
Category	Portable Radio
Language	English