The Emergency process has the highest priority. You can make emergency operation even when your
radio is transmitting or receiving.
To enable the feature on a channel, an emergency system must be assigned to the channel via the
prog
ramming software. In addition, the Emergency type, Emergency ID type and Emergency mode are
settable via the programming software.
Emergency Type
For each Emergency mode, there are four Emergency types available. Y
ou can select one of them via
your dealer:
Emergency Type Description
Siren Only In Emergency mode, the radio will sound shrill alarm tone
and display the icon
.
Regular In Emergency mode, the radio will give audible and visible
indication.
Silent In Emergency mode, the radio won't give any audible or
visible indication.
Silent with Voice In Emergency mode, the radio won’t give any audible or
visible indication, but will receive voice ACK from the
companion or control center automatically.
Emergency ID Type
Your radio supports two Emergency ID types. You can select one of them via your dealer:
Emergency ID
Type
Description
None No signaling is used when the radio sends alarm
information.
HDC1200 HDC1200 signaling is used when the radio sends alarm
information.
Emergency Mode
29
To Next Page
Loading...
Need help?
General
