Hytera PNC370 - Charging the Battery; Attaching the Belt Clip

6
3.3 Charging the Battery
Caution
 Read the
Safety Information Booklet before charging.
 Use the approved charger to charge the battery.

Use the approved external power supply (Ten Pao Industrial Co., Ltd., model:
S010W
U0500200, Input: 100-240 Va.c., 50/60 Hz, 0,4 A, Output: 5,0 Vd.c., 2000 mA).
 The
remaining lithium-ion battery power is limited to 30% pursuant to the new lithium
battery shipment regulation approved by International Air Transport Association (IATA).
To charge the battery, connect the terminal to the power adapter, power bank, or PC with the USB cable.
To determine the charging status, check the battery icon or percentage shown on the LCD display.
To ensure optimum waterproof and dustproof performance, close the USB port cover after charging the
terminal.
3.4 Attaching the Belt Clip