4-2
FUNCTIONAL CHECKS
Check the operation of the truck as follows.
Before performing these checks, familiarize yourself with the starting, operating, and
Before performing these checks, familiarize yourself with the starting, operating, and
shutdown procedures in Section 5 of this manual. Also, know the safety rules given in
shutdown procedures in Section 5 of this manual. Also, know the safety rules given in
Section 1 of this manual.
Section 1 of this manual.
Test warning devices, horn, light, and other safety equipment and accessories.
Start the engine and be sure all controls and systems operate freely and return to neutral
properly. Check the:
Gauges, meters, and indicator lights
Service brakes, inching pedal, and parking brake
Hydraulic controls: lift, tilt, and auxiliary (If installed)
Accelerator pedal
Gear selector lever
Steering system
Lift mechanism and any attachments.
When the functional check are completed, follow the
standard shutdown procedures
standard shutdown procedures given in
Section 5,
Starting and operating procedures
Starting and operating procedures.
CONCLUDING THE INSPECTION
CONCLUDING THE INSPECTION
Do not operate a lift truck that has a maintenance problem or is not safe to operate.
Do not operate a lift truck that has a maintenance problem or is not safe to operate.
Remove the key from the start switch and put an
Out of service
tag on the truck.
If all of the daily inspection checks were normal or satisfactory,
the truck can be operated.
2)
3)
※
(1)
(2)
(1)
(2)
①
②
③
④
⑤
⑥
⑦
D35AOM1050
To Next Page
Loading...
Need help?
General
