5-16
TRANSMISSION COLD STARTING
TRANSMISSION COLD STARTING
At an oil temperature in the shifting circuit
< -12 ˚C, the transmission must be warmed-up
for some minutes.
This must be carried out in neutral with an
increased engine speed.
Until this oil temperature is reached, the
electronics remains in neutral, and the symbol of
the cold start phase will be indicated on the
display.
·Indication on the display :
After the indication on the display is
extinguished, the full driving program can be
utilized out of NEUTRAL.
(1)
(2)
(3)
(4)
5)
TO STOP THE ENGINE
If the engine is abruptly stopped before it
If the engine is abruptly stopped before it
has cooled down, engine life may be greatly
has cooled down, engine life may be greatly
shortened. Consequently, do not abruptly
shortened. Consequently, do not abruptly
stop the engine apart from an emergency.
stop the engine apart from an emergency.
In particularly if the engine has overheated,
In particularly if the engine has overheated,
do not abruptly stop it but run it at medium
do not abruptly stop it but run it at medium
speed to allow it to cool gradually, then stop
speed to allow it to cool gradually, then stop
it.
Place the gear selector lever in neutral.
Place the parking brake switch in the LOCK
position.
Run the engine for five minutes at low idle with
no load.
Return the start switch to the OFF position.
Remove the key to prevent other people using
the trucK.
Lock the cab door.
(1)
(2)
(3)
(4)
(5)
(6)
※
※
6)
160D9LOP07
50D9ECD17
To Next Page
Loading...
Need help?
General
