35DFOM20
Differential case
Remove the dipstick at front face of the
differential case. The oil should be leveled
with the marking on the dipstick. If the oil
level is too low, add oil through the dipstick
hole at the top of the differential case.
When filling the oil in the differential
case, take to extreme care not to spill it
on the floor.
It can cause to happen unexpected
accidents such as personal injury due
to slippage on the
oil or fire.
If the oil is spilt on the floor, wipe it off
immediately.
(2)
TORQUE FLOW Transmission
Check the oil level with the oil gauge
below the floor plate. If the oil level is too
low, add oil through the oil gauge hole.
Follow the same procedure as for the
differential case when checking the oil
level or adding oil to the clutch
transmission case.
(3)
ö
To Next Page
Loading...
Need help?
General
