EasyManuals Logo

Hyundai Verna 2010 User Manual

Hyundai Verna 2010
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
1
FEATURES OF YOUR HYUNDAI
127127127127
M420B01MC-GAT
1. POWER ON-OFF Control Knob
The radio unit may be operated when
the ignition key is in the “ACC” or “ON”
position. Press the knob to switch the
power on. The LCD shows the radio
frequency in the radio mode or the tape
direction indicator in the tape mode. To
switch the power off, press the knob
again.
VOLUME Control
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
2. BAND Select Button
Pressing the button changes the
AM(MW, LW), FM1 and FM2 bands.
3. TUNE/MODE Select Knob
Rotate the knob clockwise to increase
the frequency and turn the knob coun-
terclockwise to reduce the frequency.
Mode Select Knob
Pressing the MODE knob changes the
BASS, MIDDLE, TREBLE, FADER and
BALANCE mode.
The mode selected is shown on the
display.
After selecting the each mode, rotate
the mode select knob clockwise or
counterclockwise.
BASS Control
To increase the BASS, rotate the knob
clockwise, while to decrease the BASS,
rotate the knob counterclockwise.
MIDDLE Control
To increase the MIDDLE, rotate the
knob clockwise, while to decrease the
MID, rotate the knob counterclockwise.
TREBLE Control
To increase the TREBLE, rotate the
knob clockwise, while to decrease the
TREBLE, rotate the knob counterclock-
wise.
FADER Control
Rotate the control knob clockwise to
emphasize rear speaker sound (front
speaker sound will be attenuated). When
the control knob is turned counterclock-
wise, front speaker sound will be em-
phasized (rear speaker sound will be
attenuated).
BALANCE Control
Rotate the knob clockwise to empha-
size right speaker sound (left speaker
sound will be attenuated). When the
control knob is turned counterclock-
wise, left speaker sound will be empha-
sized (right speaker sound will be at-
tenuated).
4. AUTO SEEK Select Button
(Automatic Channel Selection)
Press the AUTO SEEK select button.
When the side is pressed, the unit
will automatically tune to the next higher
frequency and when the side is
pressed, it will automatically tune to the
next lower frequency.
FM/AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hyundai Verna 2010 and is the answer not in the manual?

Hyundai Verna 2010 Specifications

General IconGeneral
BrandHyundai
ModelVerna 2010
CategoryAutomobile
LanguageEnglish

Related product manuals