Ambe | 09
Alarm Setting and Wake Up Functions
To set an alarm, ensure that the Ambe is in Standby mode by long pressing the Mode Select key (11).
To enter Alarm Set mode long press the Alarm Set key (4).
Set Alarm Time
Set hour Set minutes
0:00 7:00
7:00 7:3 0
AL1
AL1
AL1
AL1
Select Sunrise Mode
When the Sunrise function is set to ON the lamp will switch on
automatically at a low level 15 minutes before the alarm sounds
and gradually brighten as the alarm time approaches.
A small
icon appears under the time on the display to indicate when sunrise mode is set and active.
yes
AL1 AL1
1-7 1-5
AL1 AL1
Alarm Frequency
Select which days the alarm will sound. Choose from Daily: d1-7
Weekday: d1-5 / Weekend: d6-7 / Monday: d1 / Tuesday: d2
Wednesday: d3 / Thursday: d4 / Friday: d5 / Saturday: d6 / Sunday: d7
Setting Second Alarm
To set a secondary alarm, repeat the steps above. If only one alarm is required, long press the Mode Select key (8) to
exit the alarm set mode.
Activating/Deactivating Alarm
To activate or deactivate any alarms, while in Standby Mode, short press the Alarm Set key (4) repeatedly to cycle
through the alarm set modes.
10:28 10:28 10:28 10:28
AL1 AL1
AL2 AL2
Alarm 1
Alarm 2
Alarm 1 + Alarm 2
No Alarm
To Stop or Snooze (Delay) the Alarm
Press the Snooze key (11) to delay the alarm by 9 minutes
or press the Mode key (9) to stop it.
➡
➡
9 minutes
Snooze Stop
➡
Off
SNOOZE
SLEEP/DIMMER
Alarm Source
Select the sound source for the
alarm. Choose from ‘bP’ -
electronic Beeps, the preset
FM station last listened to e.g. ‘98.2’ or one of the nature sounds ‘n01-n15’.
p
98.2
AL1
AL1
FM
To Next Page
Loading...
Need help?
General
