2.3.
MOUNTING ON THE BIKE
I LOCK IT Pro is firmly attached to the seat stays of your
bike. I LOCK IT Pro has four different openings for
mounting. Through these openings
I LOCK IT Pro must be mounted at the optimum height.
I LOCK IT Pro may only be mounted on the rear
wheel. Mounting on motorcycles such as scooters,
motorcycles or S-pedelecs (pedelecs with up to 45
km|h assistance) is not permitted.
ASSEMBLY FOR BICYCLES WITH THREADED BUSHES
If your bike already has threaded bushes for screwing on frame locks,
please follow these instructions:
Most city, trekking and e-bikes have threaded
bushings. On some models, these may be
protected by plastic covers. These covers must be
removed before installing I LOCK IT Pro.
To Next Page
Loading...