4.2.
I LOCK IT PLUG-IN CABLE
|
PLUG-IN CHAIN
The plug-in cable and the plug-in chain allow you to
additionally lock your bike with a fixed object.
To do this, carry out the following steps:
I.
Place the cable/chain around a fixed object
(e.g. a bicycle stand).
II.
Guide the plug on one end of the cable|chain through the
loop on the other end of the cable|chain.
III.
Pull on the cable|chain to reduce the loop size.
IV.
Insert the plug all the way into the opening provided on
your I LOCK IT Pro and make sure that it is firmly
seated.
As soon as I LOCK IT Pro detects that an extension has been
inserted, it automatically performs a locking process. Your
extension and your bike are locked automatically.
To Next Page
Loading...