I LOCK IT PRO - Acoustic Signals

42
OPERATION
As soon as the key fob LED and the I LOCK IT Pro button
light up blue for 5 seconds, a permanent connection has
been established between the key fob and I LOCK IT Pro.
The key fob must be in the factory settings for
this.
3.7. ACOUSTIC SIGNALS
WARNING TONES
I LOCK IT Pro emits warning tones in various situations (e.g.
unsuccessful unlocking or locking). These tones can be
switched off and on using the slider in the
I LOCK IT app.
If the warning tones are deactivated, the I LOCK IT Pro button
continues to flash red in the event of a warning, but there is
no audible warning.