The color code can only be entered if there is no
active Bluetooth connection between your
smartphone and I LOCK IT Pro or if the
smartphone is out of range for opening by
pressing a button.
Follow the instructions to enter the color code:
I.
Press the button repeatedly until it displays the desired
1st color. The colors appear in this order: green, blue,
red, white.
II.
Wait until the button stops lighting up and repeat the
process for the next color.
III.
Repeat the process for all 6 colors.
After entering the correct color code, I LOCK IT Pro opens. If
an incorrect code is entered, the LED flashes red and you can
then start a new color code entry.
•
After entering a color, you have 5 seconds to start
the next entry.
•
An incomplete entry is canceled after 5 seconds
and indicated by 3 flashes.
•
If the color code is entered incorrectly 5 times
within 3 minutes, then the entry is blocked for 3
minutes.
To Next Page
Loading...