What to do if the blood sample is not good for i-SENS CareSens N Blood Glucose Meter?
If the blood sample used with your i-SENS Blood Glucose Meter has abnormally high viscosity or insufficient volume, repeat the test using a new test strip.
Why does the i-SENS CareSens N test result not match my expectation?
If the test result from your i-SENS Blood Glucose Meter doesn’t match your expectation, repeat the test using a new test strip. Also, check the validity period of the test strip and check the meter itself.
What to do if i-SENS Blood Glucose Meter display is blank?
If the display of your i-SENS Blood Glucose Meter is blank even after inserting a test strip, consider the following: * Ensure the test strip is inserted with the contact bars facing up. * Verify the strip is fully inserted into the test strip port. * Confirm that you are using the correct test strip. * Check that the batteries are correctly inserted with the ‘+’ side facing up. * Try replacing the batteries.
Why test doesn't start after applying blood on i-SENS Blood Glucose Meter?
If the test on your i-SENS Blood Glucose Meter does not start even after applying the blood sample, ensure the confirmation window is completely filled. If not, repeat the test using a new test strip.
What to do if i-SENS Blood Glucose Meter test result doesn't match how I feel?
If the test result from your i-SENS Blood Glucose Meter doesn't match how you feel, try the following: 1. Repeat the test using a new test strip. 2. Check the "Use By" date on the test strip. 3. Perform a control solution test.
General| Brand | i-SENS |
|---|---|
| Model | CareSens N |
| Category | Blood Glucose Meter |
| Language | English |
To Next Page
