To Next PageTo Next PageWhat to do if i-SENS Nipro Premier alpha Blood Glucose Meter test result does not match how you feel?
If the test result from your i-SENS Blood Glucose Meter doesn't align with how you feel, try the following: * Repeat the test using a new test strip. * Check the expiration or discard date of the test strip to ensure it's still valid. * Perform a control solution test.
What to do if i-SENS Nipro Premier alpha Blood Glucose Meter test does not start after applying blood?
If your i-SENS Blood Glucose Meter test doesn't start even after applying blood, make sure the confirmation window is completely filled. If it is not, repeat the test with a new test strip.
General| Measuring Time | 5 seconds |
|---|---|
| Operating Temperature | 10 - 40 °C (50 - 104 °F) |
| Operating Humidity | 10 - 90% RH |
| Blood Sample | Capillary whole blood |
| Measuring Range | 20-600 mg/dL |
| Memory | 500 results |
| Battery Life | Approximately 1, 000 tests |
| Storage Conditions | -20-60°C (-4-140°F) |
Introduction to the blood glucose monitoring system.
Details on using Bluetooth for data transfer and smartphone connectivity.
Crucial safety advice regarding Bluetooth usage in restricted areas.
Information on ownership and usage of registered trademarks.
Essential safety and usage guidelines before operating the system.
Specifies the purpose and scope of the blood glucose monitoring system.
Explains the various symbols and their meanings in the manual.
Details technical specifications of the meter and system components.
Lists the components included in the Nipro Premier alpha System package.
Step-by-step guide for battery management in the meter.
Instructions on how to properly clean and maintain the meter.
Guidance on the correct and safe disposal procedures for the meter.
How to insert and use the blood glucose test strips correctly.
Guidelines for proper storage, handling, and warnings for test strips.
Identifies key components and ports of the Nipro Premier alpha Meter.
Explains the various symbols and indicators on the meter's display screen.
Initial steps to enter setup mode and navigate settings.
Instructions for pairing the meter with a smartphone via Bluetooth.
Details on entering the PIN to establish a Bluetooth connection.
Procedure to set the current year, month, and day on the meter.
How to select time format and set the current hour and minute.
Configuration for meter sound alerts and beeps.
How to enable or disable the test strip expiration date notification.
How to configure the low blood sugar alert level.
Procedure to input the expiration date for test strips.
Steps to verify the meter and test strips are functioning correctly.
Guide on performing control solution tests for accuracy verification.
How to apply control solution and compare results.
Troubleshooting out-of-range control solution results.
Explanation of the lancing device and its safety precautions.
Step-by-step instructions for assembling and preparing the lancing device.
How to insert a test strip into the meter correctly.
Instructions on how to apply blood to the test strip for measurement.
How the meter stores results and handles test strip removal.
How to add flags (pre-meal, post-meal, fasting) to test results.
Safe and proper methods for disposing of used lancets.
Explanation of alternate site testing and its benefits.
Guidance on performing blood sampling from forearm and palm.
Key information and considerations for performing alternate site tests.
Important precautions and advice before and during alternate site testing.
Explains high (HI) and low (Lo) glucose result indicators.
Provides general target blood glucose ranges and reference values.
How to transfer test results to a computer using software.
Information on the meter's capacity to store test results.
How to access and view stored average blood glucose values.
How to review individual stored test results and their details.
How to set and manage the post-meal alarm feature.
Instructions for setting up to three custom time-based alarms.
Detailed explanations of common error codes and troubleshooting steps.
Solutions for common issues like blank display or test failures.
Details on the meter's accuracy and precision evaluation results.
Further details on accuracy and precision evaluation for different concentration ranges.
Analysis of how various substances affect glucose measurement accuracy.
Continued evaluation of substances affecting glucose measurements.
Results from a study evaluating glucose values obtained by lay persons.
Details the warranty period and coverage for the Nipro Premier alpha Meter.
Instructions on how to get warranty service or repairs.
