i-SENS Nipro Premier alpha - System Setup and Connectivity; Initial System Setup; Bluetooth Pairing Procedure

16 17
Setting Up Your System
Press and hold the ● button for 3 seconds to enter SET mode.
After all settings are finished, press and hold the ●
button for 3
seconds to turn off the meter.
Press the ◀ or ▶ button to change values. Press and hold the
◀ or ▶ button to scroll faster.
Step 1 Entering SET Mode
Press and hold the ●
button
for 3 seconds to enter SET
mode. After all the segments
flash across the screen, 'SET' will
show up.
Press the ◀ or ▶ button to
select 'YES' and press the ●
button to go to the next step.
Note:
Follow steps 2–3 to pair your meter and smartphone. Pairing
allows the meter to communicate wirelessly with your
smartphone. Ensure that devices are within the maximum
Bluetooth range (10 metres). Before pairing your meter and
smartphone, download and install the SmartLog mobile app
on your smartphone.
Step 2 Bluetooth Pairing
1
If you do not want to connect your meter
to your smartphone, press the
● button
when the screen shows on the right. The
meter will go to Step 4 Year Setting mode.
Setting Up Bluetooth
1
2
Press the ◀ or ▶ button. The meter
screen will display 'OFF', 'On', and 'PAIr'
in turn. To pair your meter with your
smartphone, press the
● button when
'PAIr' blinks on the screen.
Note:
The symbol will appear on the
screen when the Bluetooth feature
is on. When the
symbol is not
present on the screen, the Bluetooth
feature is off. When you need to turn
off/on the Bluetooth feature, press the
● button when OFF/On blinks on the screen.
2