To Next PageTo Next PageWhat to do if i-SENS Blood Glucose Meter test result is inaccurate?
If the test result from your i-SENS Blood Glucose Meter does not match how you feel, try repeating the test with a new test strip. Also, check the expiration date of the test strip to ensure it is still valid. You may also want to perform a control solution test.
How to fix a blank display on i-SENS Blood Glucose Meter?
If the display of your i-SENS Blood Glucose Meter is blank even after inserting a test strip, please ensure the test strip is inserted correctly, with the contact bars facing up and fully inserted into the test strip port. Verify that you are using the appropriate test strip. Also, check that the batteries are inserted correctly, with the ‘+’ side facing up. If necessary, replace the batteries.
Why does my i-SENS Blood Glucose Meter show an electronic error?
If an electronic error occurs during the test with your i-SENS Blood Glucose Meter, repeat the test using a new test strip. If the error message continues to appear, it is recommended to contact your authorised i-SENS sales representative for further assistance.
What to do if i-SENS Blood Glucose Meter test doesn't start?
If your i-SENS Blood Glucose Meter test does not start even after applying the blood sample on the strip, check to see if the confirmation window is completely filled with blood. If not, repeat the test using a new test strip.
Why i-SENS Blood Glucose Meter shows error with wrong test strip?
This error message on your i-SENS Blood Glucose Meter appears when the wrong blood glucose test strip is used. Repeat the test after inserting a CareSens N test strip.
What to do if blood sample is not good for i-SENS Blood Glucose Meter?
If the blood sample used with your i-SENS Blood Glucose Meter has abnormally high viscosity or insufficient volume, repeat the test after inserting a new test strip.
General| Brand | i-SENS |
|---|---|
| Model | GM505PAD |
| Category | Blood Glucose Meter |
| Language | English |
Warnings for safe operation and accurate results.
Step-by-step guide for safely inserting or replacing meter batteries.
Guide to set the meter's clock, date, and time format.
How to configure the post-meal alarm for 2 hours after setting.
Guide to set up to three daily alarms with specific times.
Procedure to verify meter and strip functionality using control solution.
Steps for performing a control solution test to ensure accuracy.
Steps to insert the test strip and prepare the meter for testing.
Steps to get a blood sample using the lancing device from the finger.
How to transfer the blood sample to the test strip for measurement.
Explains high (HI) and low (Lo) glucose level indicators on the meter.
Explains common error codes (Er1, Er2, Er3) and their solutions.
Actions for specific error codes like Er4, Er5, Er6, Er8.
Common problems and solutions for meter operation.
