i-SENS TEE2 User Manual

i-SENS, Inc.
27-36, Gwangun-ro, Nowon-gu
Seoul 139-845, Korea
www.i-sens.com
© 2015 i-SENS, Inc. All Rights Reserved PGC8E3060 REV0 03/2015
Medical Technology Promedt
Consulting GmbH
Altenhofstrasse 80, D-66386
St. Ingbert, Germany
TM
Spirit Healthcare Ltd.
Spirit House, Selbury Drive, Oadby,
Leicester, LE2 5NG
Customer Support Tel : 0800 881 5423
www.spirit-healthcare.co.uk
®
®

i-SENS TEE2 Specifications

General

Blood Sample	Capillary Whole Blood
Measuring Range	20-600 mg/dL
Operating Temperature	10-40°C
Operating Humidity	10-90% RH
Memory	500 test results
Dimensions	93.5 x 49 x 17.5 (㎜)
Weight	43g (with battery)
Measurement Time	5 seconds
Sample Size	0.5 µL
Battery Life	Approximately 1, 000 tests
Battery	CR2032

Summary

Important Information

Intended Use and Symbols

Explains the system's intended use and common symbols in the booklet.

General Safety Warnings

Highlights critical warnings for safe and accurate blood glucose monitoring.

Product Specifications

Technical Specifications

Details system specifications like sample size, test time, and battery life.

Operating Ranges

Outlines acceptable operating conditions for temperature, humidity, and hematocrit.

System Maintenance

Battery Management

Guides on how to insert or replace the meter's batteries.

Caring for Your System

Provides instructions on cleaning and maintaining the blood glucose meter.

Test Strip Handling

Test Strip Description

Details the parts of the test strip and how to insert it into the meter.

Test Strip Warnings

Crucial warnings and precautions for using TEE2 blood glucose test strips safely.

Meter Components and Display

Meter Overview

Identifies the physical components of the TEE2 blood glucose meter.

Meter Display Indicators

Explains the meaning of various symbols and indicators on the meter's display.

Initial System Setup

System Activation

Instructions on how to switch on the meter for the first time.

Setting Date and Time

Guides on setting the correct date and time on the blood glucose meter.

System Configuration

Setting Hour and Minute

Details how to set the hour and minute for the meter's clock.

Configuring Audio Alerts

Instructions on enabling or disabling audible alerts and beeps on the meter.

System Verification and Control

Checking System Functionality

Explains how to verify the meter and test strips are working correctly.

Performing Control Solution Test

Step-by-step guide for performing a control solution test.

Control Solution Results Analysis

Interpreting Control Results

How to compare control test results to the printed range.

Troubleshooting Out-of-Range Results

Identifies common reasons for control results falling outside the expected range.

Lancing Device Operation

Lancing Device Overview

Describes the components and basic function of the lancing device.

Lancing Device Preparation

Guides on how to prepare the lancing device for blood sample collection.

Blood Sampling Procedures

Setting Lancing Depth

Explains how to adjust the lancing device depth for optimal sample collection.

Marking Post-Meal Tests

How to mark a test result as post-meal on the meter.

Blood Sample Application

Obtaining the Blood Sample

Instructions on obtaining a blood sample from the finger using the lancing device.

Applying Sample to Test Strip

How to apply the blood sample to the test strip for accurate measurement.

Disposal and Alternative Testing

Lancet Disposal

Safe procedures for disposing of used lancets.

Alternative Site Testing (AST) Basics

Introduces Alternative Site Testing and its benefits for pain reduction.

Alternative Site Testing Guidelines

AST Considerations

Key factors to understand before performing tests at alternative sites.

AST Precautions

Important precautions to follow when using alternative sites for testing.

Interpreting Results

HI and Lo Messages

Explains the meaning of "HI" and "Lo" messages on the meter display.

Target Blood Glucose Ranges

Provides target blood glucose ranges for reference and comparison.

Data Management and Memory

Transferring Test Results

How to transfer stored test results to a computer.

Meter Memory Overview

Explains the meter's capacity to store test results with time and date.

Accessing Stored Data

Viewing Test Results

How to turn on the meter and view stored test results.

Viewing Averages and Pre/Post-Meal Data

Accessing average results and pre/post-meal data from the meter memory.

Advanced Features and Troubleshooting

Setting the Post-meal Alarm

How to set and manage the post-meal alarm feature.

Error Message Explanations

Explains common error messages and their solutions.

Troubleshooting Guide

Resolving Error Messages

Provides solutions for additional error messages encountered with the meter.

General Troubleshooting

Addresses common problems and their troubleshooting steps.

Performance Characteristics

Precision Analysis

Details the precision studies performed on the TEE2 BGM System.

Accuracy Analysis

Presents the accuracy results from laboratory and clinical tests.

Warranty and Service

Product Warranty

Outlines the terms and duration of the TEE2 meter warranty.

Obtaining Warranty Service

Instructions on how to obtain service or repair under warranty.