Step 6 Setting the Hour
Press C button until the correct hour
appears.
After the hour is set, press the M button to
progress to setting the minute.
Step 7 Setting the Minute
Press C button until the correct minute
appears. After setting the minute, press
the M button to progress to setting the
sound.
Step 8
On pressing C button, the screen will display
the On or OFF. Press the M button to confirm
the selection.
The meter will beep in the following instances,
if set to On.
•When the test strip is inserted in the meter
•When the blood sample is absorbed into the
test strip and the test starts
•When the test result is displayed
•When you push the M button or C button to
turn on the meter
•When you push the C button to set the
post-meal (PP2) alarm
•When it is time for a preset blood glucose test
If the sound is set to OFF, none of the sound
functions will work.
To confirm all settings, press and hold the M button and the
screen will switch off.
Setting the Sound On/OFF
Note :
•Only when the sound is set to OFF, symbol appears on
the display.
•At any stage, if the M button is pressed for 3 seconds, Time
and Date setting mode will finish and the meter will be
turned off. Press and hold C to scroll through numbers
quickly.