i-SENS TEE2 - Initial System Setup; System Activation; Setting Date and Time

14 www.i-sens.com
www.spirit-healthcare.co.uk 15
Setting up Your System
Press and hold the M button for 3 seconds to switch on the
meter. After all settings are finished, press and hold the M
button for 3 seconds to turn off the meter.
Press C button to reach the accurate value. Press and hold C to
scroll faster.
Adjusting the Date and Time
Step 1 Entering the SET Mode
Press and hold the M button for 3 seconds
to switch on the meter. After all the
segmentsflashacrossthescreen,the‘SET’
character will be displayed on the screen.
Press the M button again to progress to
setting the year.
Step 2 Setting the Year
Press and release C button to adjust until
the correct year appears. Press and hold
C button to scroll through the numbers
quickly. After setting the year, press the
M button to confirm your selection and
progress to setting the month.
Step 3 Setting the Month
A number indicating the month will be
blinking on the left corner of the screen.
Press C button until the correct month
appears. Press the M button to confirm your
selection and progress to setting the date.
Step 4 Setting the Date
Press C button until the screen displays the
correct date. Press the M button to confirm
the date and progress to setting the time.
Step 5 Setting the Time
The meter can be set in the AM/PM 12-hour
or the 24-hour clock format. Press C button to
select a format. The AM/PM symbol is not
displayed in the 24-hour format.
After selecting the format, press the M
button to progress to setting the hour.