i-SENS TEE2 - Accessing Stored Data; Viewing Test Results; Viewing Averages and Pre;Post-Meal Data

36 www.i-sens.com
www.spirit-healthcare.co.uk 37
Step 4
Press the C to view 1, 7, 14, 30 and 90 day average values and
the number of tests performed post-meals with the symbol
for the last test period.
Note:
• The control solution test results saved with 'check' symbol
are not included in the averages.
• The control solution test results saved with 'check' symbol
will be displayed with 'check' symbol when you review the
stored test results.
Step 3
Repeatedly press the C to view 1, 7, 14, 30 and 90 day average
valueandthenumberoftestsperformedpre-mealswiththe‘Pr’
symbol for the last test period.
Step 5
Use the M button to scroll back through the averages seen
previously. Press the M button for 3 seconds to turn the meter off.
C button
Pre-meal
average
(1, 7, 14, 30,
90 days)
M button
C button
Pre-meal
average
(1, 7, 14, 30,
90 days)
Pre-meal
average
(1, 7, 14, 30,
90 days)
M button
Step 1
Press the C or M button to turn
the meter on. The current date
and time will be displayed on
the bottom of the screen for 2
seconds, followed by the 1 day
average value and the number
of the test results saved within
the current day.
Step 2
Use the M button to scroll through the test results, starting from
the most recent and ending with the oldest. Press the C to return
to the result seen previously.
After checking the stored test result, press the S button to turn off
the meter.
Viewing Test Results Stored in the Meter’s Memory
The number of tests
within the current day
M button
C button