22 23
Step 10
On pressing the ◀ or ▶ button, the
screen will display 'On' or 'OFF'. Press the
●
button to confirm the selection.
The meter will beep in the following
instances if the sound is set to On.
•When you press a button to turn on
the meter
•When the test strip is inserted in the
meter
•When the blood sample is absorbed
into the test strip and the test starts
•When the test result is displayed
•When you press and hold the ◀
button to set the post-meal (PP2) alarm
•When it is time for a pre-set blood
glucose test
Setting the Sound On/OFF
Note:
The symbol is displayed only when the sound is set to
OFF.
If the sound is set to OFF, none of the sound functions will work.
After setting the sound, press the ● button to go to the next step.
Step 11
This setting allows you to turn the strip expiration date indicator
on or off. This setting turns the function on or off only. See page
25 to set the strip expiration date.
When 'EP' appears on the screen, press the ◀ or ▶ button. The
screen will display 'On' or 'OFF'. Press the ● button to confirm
the setting.
If you do not want to set the indicator, press the ● button while
the screen displays 'OFF'.
Turning on the Strip Expiration Date Indicator
Note:
If the pre-set expiration date
is reached, the meter will
display 'EP' when the test strip
is inserted and when the test
result is displayed right after
the test.
If the expiration date is set to
October of 2021, the meter will
display 'EP' at the beginning of
November, 2021.
To Next Page
Loading...
Need help?
General
