18 19
The last 4
characters
of the
meter serial
number
3
Look for 'Nipro Premier' and
the last 4 characters of the meter
serial number on the SmartLog
mobile app screen to correctly
identify your meter.
Touch your meter's ID (Nipro
Premier XXXX) on the SmartLog
mobile app screen.
6
When your meter and
smartphone are paired and
connected, the meter will display
'SUCCESS' and the saved test
results will be transferred to your
smartphone.
7
When the data transfer is
finished, the meter will display
'End' on the screen. Press the
●
button to go to Step 10 Sound
Setting mode. See page 22. If the
meter displays 'FAIL' and then
'OFF', repeat steps 2 to 5.
4
The meter will display six digit
PIN number.
5
Enter the PIN number into the SmartLog mobile app and
touch 'OK'. Make sure the PIN you enter on your smartphone
matches the PIN on your meter screen.
Note:
Some smartphones, especially those that are not tested or
approved by Nipro, may be incompatible with your meter.
Visit www.i-sens.com/smartlog for more information about
supported smartphones. You can also scan the QR code on the
back cover of this user manual.
Note: Follow the on-screen instructions on SmartLog mobile
app to begin searching your meter. Some content or menus may
differ depending on your smartphone's operating system or
SmartLog version.
Step 3 Entering the PIN number
1
The symbol and 'PIn' will
appear if you press the
● button
when the meter screen shows 'PAIr'.
2
Launch SmartLog mobile app to start pairing the meter with
your smartphone. Find the 'Accessories' menu and select the
appropriate meter model on SmartLog mobile app.
To Next Page
Loading...
Need help?
General
