36 37
Test result
Step 10
At this time, the display segments will rotate clockwise while the
blood is going in.
Test result will appear after the meter counts down from 5 to 1.
The result will be automatically stored in the meter’s memory.
If the test strip is removed after the test result is displayed, the
meter will automatically switch off after 3 seconds. Discard
used test strips safely in disposable containers. If the Bluetooth
feature is activated, the meter will send the test result to the
connected smartphone.
Step 11
You can attach a flag to a blood glucose test result to indicate
particular situations while the strip is still in the meter. When
the result is displayed right after a test, press ◀ or ▶ button
to select a pre-meal flag ( ), a post-meal flag ( ), or a fasting
flag ( ). When you remove the test strip while the desired flag
is blinking, the test result is stored with the flag.
If you do not want to add any flags on the test result, remove
the strip after the test result is displayed.
No flag Pre-meal flag Post-meal flag Fasting flag
Note:
To transmit glucose data using the Bluetooth
feature,
•The Bluetooth feature on the meter must be
turned on,
•The meter and a smartphone must be paired,
• The SmartLog mobile app must be launched.
The meter will transmit data in the following cases,
•When the strip is ejected after measuring,
•When the meter is turned on (only when untransmitted data
exists).
To Next Page
Loading...
Need help?
General
