i-SERV 8630 - Handset Volume; Ring Cadence

Version 0.3 Page | 12
Handset volume
Volumes for each tone are shown below.
Tone Type
Level
Comment
Ring Melody
It depends on Ringer Volume
Setting.
Alert Tone
It depends on Alert Volume Setting.
Key Sound
Constant
Can be enabled or disabled by the user.
(Options are Silent, Click, Tone)
Confirmation Sound
Constant
Can be enabled or disabled by the user.
Coverage Warning
Constant
Used to
warning for out of RF link range.
Can be enabled or disabled by the user.
Charger Warning
Constant
Used to warning for battery low. Can be
enabled or disabled by the user.
Ring cadence
Cadence 1:
2s
4s
2s
4s
2s
4s
2s
4
2s
Cadence 2:
2s
4s
2s
4s
2s
4s
2s
4
2s
Note:
When ringer volume is Off (Vibrate), Handset vibrates according to this timing (Xs on / Xs off) in all the
cadences.
On
On