Version 0.3 Page | 26
Call Bridging (Attended Transfer)
•
While “Connected”, press the Hold option, to put the call session on hold.
•
Enter the transfer destination number
•
Enter the transfer destination number and press Green button to connect/establish call
session between Facilitator and Line 2 or the destination party shown as “Line 1” and “Line 2”.
•
Next, Press the “Transfer” option to transfer call session from “Line 1” to “Line 2”
•
Handset performs transfer procedure and returns to Idle mode (On hook mode)
Call Conference (Conference)
•
While “Connected”, press the Hold option, to put the call session on hold.
•
Enter the transfer destination number
•
Press the Green button to connect/establish call session between Facilitator and Line 2 or
the destination party.
•
Next, Press the “Conf.” option to establish conference call session between all dialed parties
i.e. Originator, Facilitator and Destination party.
To Next Page
Loading...