i3TOUCH EX Series - Manual | 21
Startup and shutdown�
Adjust the display’s behavior during startup and shutdown.
• Define the active video channel after startup:
A. Last active video channel before shutdown.
B. Always startup on specific video channel (default: Android).
• Define when the OPS Built-in computer should startup (if installed):
A. Only after switching to the video channel input.
B. Startup on any channel (startup together with display).
• Enable / Disable the Motion Sensor.
If the motion sensor does not detect presence/movement in the room for 15 minutes, the display
will automatically shut down.
Set an automatic time-based schedule for the device to start up and shut down. Up to 3 scheduling tasks
can be defined. Example:
• Automatically start up every weekday at 8:30 AM.
• Automatically shut down every Monday, Tuesday, and Thursday at 5 PM.
• Automatically shut down every Wednesday at 12:30 PM.
• Automatically shut down every Friday at 4 PM.
Note: The display will provide a warning reminder before shutting down, to allow a user to manually cancel the task.
To Next Page
Loading...
Need help?
General