To Next Page

To Previous Page

i3TOUCH EX Series - Manual | 11

Connections

For the safety of you and the machine, please do not connect any power plug before connection.

External computer and touch connection�

• Use VGA cable to connect to VGA output port of external computer, and meanwhile use headphone audio

cable to connect to external computer audio output interface. (Or use HDMI cable to connect to HDMI

output port of external computer.) (Or use Type-C cable to connect to Type-C output port of external

computer.)

• Use USB cable to connect to external computer USB port. (Or use Type-C cable to connect to Type-C out-

put port of external computer.)

• After cable connection, plug in power cord, and switch power on.

• Start external computer.

• Press key, and the equipment is power on.

• Press the INPUT key to switch to VGA/HDMI/ Type-C channel

NOTE: External computer input, equipment’s best resolution is 3840*2160 or 1920*1080.

Recommended computer configuration:

• 1 GB Available Hard Drive space

• 2.0 GHz Processor, 1GB RAM

• More than 256 color display cards

• VGA OUT / HDMI OUT, Audio-OUT, USB Interface

• Supported Resolutions 800*600,1024*768,1920*1080,3840*2160

i3-TECHNOLOGIES i3TOUCH EX Series User Manual

Questions and Answers: