i3TOUCH EX Series - Manual | 33
Open / closed meeting mode
Use the Meeting Mode button to change the meeting dynamic according to the type of your meeting.
OPEN: Allows anyone to connect and immediately show the screen content.
CLOSED: Allows anyone to connect, however, the controls to display the screen content are on the i3TOUCH
EX. A connected user is standby in the background, until the screen content is activated through the List
button.
Closed Mode is best suited for a presentation-type meeting (or part of the meeting). The person standing at
the display is the operator and switches between the screen content.
Open Mode is better suited for a conference-type meeting (or part of the meeting) where every connected
user can take over and show their screen content.
Enable / disable touch
Allow or deny the touch input on the screen of the i3TOUCH EX to control the connected computer.
NOTE: Touch functionality only works via the i3ALLSYNC Transmitting clients on Windows and MacOS.
Use the i3ALLSYNC HDMI transmitter (optional accessory)
i3-Technologies also offers the i3ALLSYNC HDMI Transmitter (purchased separately) for meeting attendees
(guests) that can’t or won’t install the client software. Once the i3ALLSYNC HDMI Transmitter is paired only
once with the display, you only need to plug in the HDMI and USB cable and press the button to immediately
share the HDMI content on-screen.
Connect to i3TOUCH EX with i3ALLSYNC HDMI transmitter (device not included)�
If using the i3ALLSYNC HDMI Transmitter device, just connect and screensharing will start with the press
of a button. The i3ALLSYNC interface provides useful instructions for each operating system to start the
presentation.
Closed Mode
(presenter starts
each video stream)
Open Mode
(everyone can
video stream freely)
To Next Page
Loading...
Need help?
General