iB KOJAK - Cleaning

6
CLEANING
BEST PRACTICES
Cleaning the Kojak scanner is a simple process.
· Kojak should be cleaned approximately every 1000 scans
or as needed.
· Use IB Cleaning Kit part number IBHCK-01.
· Wipe clean using microfiber cloth (included with cleaning kit).
WARNINGS AND CONSIDERATIONS
· Alcohol and alcohol-based cleaning solutions may stain
if allowed to remain on the platen.
· Wipe alcohol products from Kojak’s platen and clean
using a water-based solution.
· Care should be taken to clean and remove chemicals
immediately following a spill.
· Remove chemical solutions immediately using a water-moistened rag.
· Common chemicals that require immediate attention include:
- Acetone and polish removers
- Paint
- Paint thinners
- Stain removers
- Gasoline or petroleum products
- Pesticides and herbicides
- DEET or DEET infused products
- Cleaning cloths, rags, or devices impregnated
with any of the above examples