2. Type-C Port：
Connect the DX200 to a computer or a
USB charger to charge the DX200.
Connect the DX200 to a computer to allow
the DX200 to work as a card reader.
Connect the DX200 to an OTG storage
device to play music files.
Connect the DX200 to a PC or a Mac
computer to work as a USB DAC.
3. Balanced Phone Port:
Plug in the 2.5mm balanced earphone and
output sound through the Balanced phone
port.
4. Phone Port:
Plug in the single-ended earphone and
output sound through the phone port.
5. Line Out Port:
Use a 3.5 to 3.5 interconnect cable to play
music stored in the DX200 on an external
amplifier with a line in port.
To Next Page
Loading...
