iBasso DX200 - USB DAC Functionality

Connecting to a computer to work
as a USB DAC:
The DX200 can work as a USB DAC for
Windows PC, Mac computer, and Linux
computer.
It is driver free on Mac computer and
Linux computer. For Windows PC, one
can download the driver from iBasso.com
and install it following the steps, before
using the USB DAC function.
The DX200 supports up to 32bit/384kHz
PCM, and native DSD up to 512x when be
used as a USB-DAC.
The following is the instruction:
1. Power on the DX200.
2. Press the DAC on button on Settings/DAC.
3. The“USB DAC”screen will be shown on the
DX200.
4. Connect the DX200 to a computer via the
furnished type-C Cable.
5.
Select “iBasso Audio HiFi device” as the
audio output device. Then one can play music
on the computer and listen it via the DX200.