IBC SFC-199 - Specifications

SFC-199 - Fuel Conversion to Propane (NG to LP) Kit P-844
| 3
Fuel Conversion Instructions
Youmustbeaqualifiedtechniciantoperformafuelconversion.
Model Number Orifice Size
SFC-199 535
Table 2 - Propane Orifice Chart
To perform a fuel conversion:
1. Turnoffthegassupplyatthegasshut-offvalve.
2. Disconnecttheelectricalpower.
3. Disconnectthenutatthegasvalveoutlet(topofthegasvalve),andremovetheO-ringandorifice.
4. InsertthecorrectorificeintotheO-ring,andre-installintothenutatthegasvalveoutlet(topofthegasvalve),
andthentightenthenut.
5. Restorethegassupplybyopeningthegascontrolvalve.
6. Testforleaksbyusinganapprovedleakdetectionsolutiononalljoints.
7. Powerontheappliance.
Now,carefullyfollowtheproceduresonCombustionTestingandAdjustment.