21
Version 17.01, as of: 27-Jun-2017
4.3.7 “Plain tile” roof hook
Plain tiles have a different shape from normal roofing tiles. For this reason, a different
roof hook type is used.
Stainless steel 1.4301 S460
Dimensions base plate (length / width / height)
Dimensions hook (width / height)
Hook distance from the base plate
General construction approval
Maximum ch. load / roof hook [kN]
flat head screw 6x100-A2 TX25
flat head screw 8x100-A2 TX40
flat head screw 8x140-A2 TX40
flat head screw ASD 8x240-A2 TX40
countersunk screw 8x280 TX40
flat head screw ASD 8x300-A2 TX40
countersunk screw 8x340 TX40
connection piece for roof hook profile M10
Figure 25: parameters roof hook „Biber S+“
Figure 23: "Biber S+" plain tile roof hook
Figure 24: Depression for “Biber S"
To Next Page
Loading...
Need help?
General