IBM 3270 - Erasing a Keystroke Recording

Erasing a Keystroke Recording
To erase a keystroke recording:
1. If your work station is not in Control Mode,
press the WSCtrl key.
This line should appear at the bottom of your
screen:
[ WScrRl
2. Press the Alt and ErInp keys.
This message appears:
Enter the unique name of the recording to be deleted.
WSCTRL
AUTO ERASE NAME
3. Type the name of the recording you want to
erase.
For example, if you made the recording
named JMEMO and want to erase it, type:
Press the Enter key when the name is completed.
WSCTRL
AUTO ERASE NAME JMEMO_
4. If you type the wrong name, backspace over
it, and type a new name.
11-16 Book 3 - Using the Control Program