IBM 3270 - Printing What Appears on Your Screen

3. Press the Print key.
Did the line at the bottom of your screen
change to look like this:
I WSCTRL
PRINT SCR
4. Wait for the words PRINT SCR to disappear.
5. Press the WSCtrl key again to r-eturn to using
your notepad session.
If you want to stop the printer before the entire
screen is printed:
• Press the Alt key and the Reset key .
. Printing What Appears on Your
Screen
You can print a copy of your screen, as it
appears with all the windows showing on the
printer attached to your 3270PC.
1. Make sure that your are in workstation
control mode.
2. Press the Print key.
8-6 Book 3 - Using the Control Program