IBM 3270 - Getting Back the Your Notes

Getting Back the Your Notes
If you have made notes in your notepads and
saved them, you can get the notes back. When
you turn on the system, it doesn't get your notes
automatically. You have to get them.
Here's how you do it:
1. Make sure that your workstation is not in
control mode.
2. Press the Jump key to make a personal
computer session active.
3. Type:
Or:
INDRSTR NOTEPAD will get only your
notepads. INDRSTR will get your windows,
notepads, and keystroke recordings.
Note: You can get your notepads back
automatically by
adding the INDRSTR or
INDRSTR NOTEPAD command to a
system file called
AUTOEXEC.BAT. See
Chapter
12 if you want to use this file.
Chapter 6. Using a Notepad Session 6-5