IBM 3270 - Page 174

7. Now, type:
A>copy autoexec.bat + con: autoexec.bat
8. Press the Enter key.
This response
will appear on your screen:
A>copy autoexec.bat + con: autoexec.bat
AUTOEXEC.BAT
CON
9. Type: indrstr.
Your screen should look like this:
A>copy autoexec.bat + con: autoexec.bat
AUTOEXEC.BAT
CON
indrstr
10. Press the Enter key.
11. Press
the PF6 key.
You will see this response:
Chapter 12.
Running DOS Commands Automatically 12-3