IBM 3270 - Page 193

INDCU
INDCU022 Insert Control Program diskette
2 in drive x
Explanation: This message is displayed by the
customization program while it is creating your
customized system.
User Response: Insert Control Program diskette
2 into the diskette drive indicated by the
message, and close the drive door.
INDCU023 Strike any key when ready ...
Explanation: The program displays this
message.
User Response: When you are ready to proceed,
press any key.
INDCU024 Drive x does not exist
Explanation: This message appears:
• If you are on the Home panel and you did not
type the letter of. a drive that exists on your
current system, or
• You did not type a valid drive letter A
through F.
User Response: On the Home panel, type the
correct letter of the drive that exists on your
current system. For any other panel, type the
desired letter A through F. If you need to restore
the previous value, move the cursor off the field.
The previous value and message INDCUOOI will
appear.
A-8 Book 3 - Using the Control Program