IBM 3270 - Page 197

INDCU
User Response:
Type Y if:
• You have patched any files on your system
diskette, or received a refresh of the code.
• You are changing from CUT to DFT Control
Unit attachment or visa versa.
• You are changing from SNA to non-SNA host
attachment or visa versa.
Otherwise, type N.
INDCU036 Customization complete
Explanation: The customization program has
transferred all the files needed for your
customized system onto the target diskette. The
customization summary panel is now re-displayed
with the values you selected for your customized
system.
User Response:
• You can end the customization program by
pressing Esc.
• You can create another copy of this same
system with the same values by pressing PF3.
• You can create a different customized system
by changing any of the values on the
customization summary panel and then
pressing PF3.
A-12 Book 3 -Using the Control Program