IBM 3270 User Manual

How to Write the SEND Command
There are several parts to the SEND command.
GGe
o
r~ ___ --.....A ....... .._ ____ ,
r-- ___
A
....... .._ ____ ,
SEND d:path filename. ext h:data set name
o
•
(member name)/password ASCII CRLF APPEND
LRECL(n) BLKSIZE(n) RECFM(x)
•
SPACE(nl,n2) units
If you need the parts shown in upper case, type
them exactly as shown. If you need the parts
shown in lower case, you must supply the names
or values that you want.
o SEND
e d:
The name of the command.
(Y
ou always need this name.)
The diskette or fixed disk drive
on which the file to be sent is
located: a, b, c, or d. (If the
file to be sent and the utilities
are on separate diskettes, this
part must name drive B. If, in
addition, you have only one
diskette drive and you are told
to insert a diskette into drive
B, insert it into drive A
instead. If the file to be sent
and the utilities are on your
7-20 Book 3 - Using the Control Program

IBM 3270 Specifications

General

Brand	IBM
Model	3270
Category	Desktop
Language	English