IBM 3270 - Page 79

• Sending a file to a partitioned data set
that has a password.
send a:pcfile.txt g:tsodset.script
(member2)/slithyll ascii crlf append
This command sends a file named
PCFILE.TXT from a diskette in drive A to
your TSO host in a host window named G. It
adds it as a member named MEMBER2 to a
partitioned data set named TSODSET.SCRIPT
on your TSO volume. This data set has a
password of SLITHY11.
•
Sending a file from your default drive and
adding it as a new data set on your TSO
volume.
send pcfile.txt g:tsodset.script/vorpa134
ascii crlf lrecl(132) blksize(132)
recfm(v) space(20,10) tracks
This command sends a file named
PCFILE. TXT from your default drive to your
TSO host. It adds it as a new data set named
TSODSET.SCRIPT on your TSO volume. A
password of VORPAL34 is assigned to it. The
records in the data set may vary in length up
to a maximum of 132 characters. The data
blocks are the same length as the records. 20
tracks are set aside for this data set. If more
tracks are needed, they will be added in
groups of 10.
7-26 Book 3 - Using the Control Program