IBM 3270 - Page 81

For example, if your default drive is A and
the utilities are on your fixed disk, type: c:
I A>o
Your default drive will change to C.
7. Type the RECEIVE command next to the
DOS ready message.
For example:
C>receive a:pcfile g:tsodset.script ascii crlt
This command moves a copy of a data set
named TSOFILE.SCRIPT from your TSO
volume on a TSO host in a host window
named G to a diskette in your A drive.
• If you do not have a file named
PCFILE.TXT on your A drive,
TSOFILE.SCRIPT will be added to the
diskette with the name PCFILE.TXT.
• If you have a file named PCFILE.TXT on
the diskette in A drive, TSOFILE.SCRIPT
will replace the PCFILE.TXT on the
diskette. Everything that was in it' will go
away.
7-28 Book 3 - Using the Control Program