18. Complete a mode 2 connection of one enclosure (A) by using YO12 cables (B) to two independent
FC EJ0J or FC EJ0M SAS adapters, as shown in Figure 18 on page 19, and then continue with
“Connecting cables, power cords, and installing covers” on page 22.
Notes:
v Independent SAS adapter 1 (C) does not have access to the other independent adapter and has
access only to drive bays D1 - D12.
v Independent SAS adapter 2 (D) does not have access to the other independent adapter and has
access only to drive bays D13 - D24.
Figure 17. Mode 1 connection of two ESLL and ESLS storage enclosures by using YO12 cables to an FC EJ0L SAS
adapter pair or an FC EJ14 SAS adapter pair with AA cables
18 Power Systems: Installing the Model 024, ESLL, or ESLS storage enclosure
To Next Page
Loading...
