IBM 5250 - Page 32

Configuring the Adapter
1. Complete steps l (page 9) through 3. The Adapter Configuration
Menu, similar to the one shown in Figure 4 on page 11, appears.
2. From the Adapter Configuration Menu, select Adapter
Configuration. The Change Adapter Configuration screen, similar
to the one shown in Figure 12, appears.
If a screen similar to the one in Figure 12 does not appear, see
"Point Enabling the Controller" on page 28.
26 5250 Express Hardware Manual
---------Change Adapter Configuration---------
Adapter: IBM 5250 Express PC Card
Support: PCMCIA Card Services for DOS
Change I/0 Port Li st
Change Memory Li st
Change Interrupt Li st
Change PCMCIA Support
Save Changes
IBM 5259 Express PC Card Configuration
I/O Port List: 9318 9698 9728 0A38 2418 2598 2718 3A38 4498
4518 5718 5A38 6518 7498 8718 9A38
Memory Li st: DC90 CC99 C999 C499 C899 D909 D499 D899 C209
C699 CA99 CE99 D299 D690 DA09 DE99
Interrupt List: 5 3 4 7 6 9 18 11 12 14 15
Esc=Return Fl=Help F2=Keys Help F19=Save
Figure 12. Change Adapter Configuration Screen