This screen shows the current configuration settings and lets you
change:
•
•
VO Port List
Memory List
Interrupt List
PCMCIA Support
Note: The Change PCMCIA Support option
is
included so that
if
you decide not to use Card Services, you can quickly access the
Change 5250 Emulation PCMCIA Adapter screen.
3.
From the Change Adapter Configuration screen, select the option
that you want to change. The Change Interrupt screen, similar
to
the one shown in Figure 13, appears showing all the possible
values for that option.
----------Change
Interrupt----------
Select
the interrupt
level
to
be
used
by
the adapter.
Use
the
-+*'
keys to
move
the
selection
bar
to
indicate
your choice
and
then press Enter .
9 10
11 12
14
15
1
Esc=Return Fl=He l p
F2=Keys
Help
Figure
13.
Change Interrupt Screen
4.
Specify the values that are available for Card Services to assign
for the 5250 emulation adapter.
If
a value is followed
by
an
asterisk, the value is unavailable for Card Services
to
assign for
the adapter. You can change whether a value is available to Card
Services
by
using the arrow keys to highlight the value whose
availability you want
to
change and then pressing Enter:
• A value that was available becomes unavailable, and an
asterisk appears next
to
it.
Part 3. Reference 27
To Next Page
Loading...
