IBM iSeries 820

Model 830 and SB2 with FC 9074: Use the diagrams and tables below for information on the Power
and signal cables for the Models 830 and SB2. There are two figures/tables:
v Models 830, SB2 with FC 9074 Single line cord (non dual line cord enabled) (See page 492)
v Models 830, SB2 with FC 9074 Dual line cord Signal cables (See page 495)
Figure 8. Models 830, SB2 System Unit with FC 9074 single line cord - non dual line cord enabled
Power and signal cables
492 Hardware (Remove and Replace; Part Locations and Listings)