Need help?Do you have a question about the IBM P275 and is the answer not in the manual?
General| Screen Size | 21 inches |
|---|---|
| Refresh Rate | 85 Hz |
| Aspect Ratio | 4:3 |
| Panel Type | CRT |
| Vertical Refresh Rate | 50 - 160 Hz |
| Dot Pitch | 0.24 mm |
| Connectivity | VGA |
| Horizontal Refresh Rate | 30 - 96 kHz |
| Input Signal | Analog |
| Input Connectors | 1 x VGA |
| Connector Type | 15-pin D-sub |
Guidelines for installing the monitor in a suitable environment, avoiding heat and magnetic interference.
Instructions for cleaning and maintaining the monitor's cabinet, panel, and controls with appropriate materials.
Recommendations for safely transporting the monitor for repair or shipment using original packaging.
Instructions on how to adjust the monitor's tilt and swivel angles for optimal viewing.
Important safety warnings related to connecting the power supply, including grounding and static discharge.
Description of controls located on the front of the monitor, including input switch and adjustment buttons.
Description of connectors on the rear of the monitor, including AC input and video input connectors.
Instructions for connecting the monitor to the computer's video output using the appropriate cable.
Instructions for connecting the monitor to a properly grounded power outlet.
Steps for powering on the monitor and computer in the correct order.
How to switch between different video input sources (e.g., computer 1 or computer 2).
Guidance on optimal placement, ventilation, and avoiding interference for the monitor.
Recommendations for setting monitor height relative to eye level for comfortable viewing.
Advice on monitor orientation to minimize reflections and ensure comfortable viewing.
Ergonomic advice for posture, breaks, and hand positioning during computer use.
How to access and navigate the on-screen display (OSD) menu for monitor adjustments.
Option to close the on-screen menu interface.
Adjusts screen contrast and brightness levels.
Adjusts horizontal and vertical picture size and centering.
Adjusts picture rotation and shape.
Adjusts color alignment for red, green, and blue signals.
Adjusts picture quality aspects like degauss and moire cancellation.
Adjusts the color temperature and selection of color modes.
Accesses advanced settings like control lock and language selection.
Explains how to select different color modes like PRESET, VARIABLE, EXPERT, sRGB.
Details on using preset color temperature modes (9300K, 6500K, 5000K).
Details on fine-tuning color temperature using the variable mode.
How to lock monitor controls to prevent accidental changes.
How to change the language of the on-screen display menu.
How to reposition the on-screen display menu if it obstructs the image.
How to select the desired color adjustment mode within the Option menu.
Resets all adjustment data for the currently active input signal to factory defaults.
Resets adjustment data for all input signals to factory defaults.
How the monitor uses preset and user-defined display modes for optimal picture quality.
Details on the monitor's power saving modes and power consumption.
Explanation of normal thin lines on the screen caused by damper wires.
Explanation of common on-screen error messages and their remedies.
Troubleshooting steps for the 'OUT OF SCAN RANGE' message.
How to display the monitor's name, serial number, and date of manufacture.
Troubleshooting steps for when the monitor displays no picture.
Solutions for 'NO SIGNAL' message or orange power indicator.
Troubleshooting steps for the 'OUT OF SCAN RANGE' message.
Steps for when the monitor is on but no picture is shown.
Remedies for unstable or distorted picture display (flickering, bouncing).
Steps to resolve a fuzzy or unclear picture.
To Next Page
