v Alphanumeric or numeric pager alerts (not supported with the Remote Supervisor
Adapter II SlimLine)
v Automatic notification and alerts
v Automated Server Restart (ASR)
v Continuous health monitoring and control
v Domain Name System (DNS) server support
v Dynamic Host Configuration Protocol (DHCP) support
v E-mail alerts
v Enhanced user authority levels
v Event logs that are time stamped, saved on the Remote Supervisor Adapter II,
and can be attached to e-mail alerts
v Independent power, which enables around-the-clock access to the server even
when the server power is off
v Advanced System Management (ASM) interconnect remote access (not
supported with the Remote Supervisor Adapter II SlimLine)
v Operating-system-failure screen capture
v Remote access through Ethernet and ASM interconnect peer-to-peer network
v Remote disk enabling the attachment of a diskette drive, CD-ROM drive, USB
flash drive, or disk image to a server
v Remote firmware update and access to critical server settings
v Remote power control
v Seamless remote accelerated graphics
v Secure Web server user interface
v Server console redirection.
This feature is not supported with the Remote Supervisor Adapter II SlimLine
when it is installed in any of the following servers:
– IBM xSeries 236
– IBM xSeries 260
– IBM xSeries 336
– IBM xSeries 346
– IBM xSeries 366
– IBM xSeries 460
– IBM System x3800
– IBM System x3850
– IBM System x3950
v Simple Network Management Protocol (SNMP) support
v Remote firmware update
v User authentication using a secure connection to a Lightweight Directory Access
Protocol (LDAP) server
2 Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide
To Next Page
