IBM System i User Manual

After you finish
__ Did you receive a cable hook with your rack shipment?
v No. Proceed to the next item.
v Yes. The cable hook can help manage the server cables in the back of the rack. To install the cable hook, slide
it into the slots located on the back of the rack as shown in the following figure.
__ Return to your initial server setup checklist and complete the next step.
Related concepts
Installing features and replacing parts
Expansion units
Related tasks
Serial uninterruptible power supply conversion cable
Cabling the HMC
Place the model 51x or 710 in the service position
Related reference
Cables and adapters
Cabling a model 9110-51A to access the Integrated Virtualization
Manager
Learn how to access the Integrated Virtualization Manager, connect external cables and power cords,
route the cables, and attach devices after you install all of your hardware features or replace parts.
130 System i and System p: Cabling your server

IBM System i Specifications

General

Operating System	IBM i
Form Factor	Rackmount, Tower
Processor	POWER5, POWER6, POWER7, POWER8, POWER9
Security	encryption
Networking	Ethernet
Reliability	redundant components
CPU	POWER processors
Memory	Up to several terabytes depending on model