IBM System i User Manual

Related concepts
Installing features and replacing parts
Expansion units
Related tasks
Accessing the ASMI using a Web browser
Accessing the ASMI using an ASCII terminal
Serial uninterruptible power supply conversion cable
Place the rack-mounted system or expansion unit in the service position
Powering the system on and off
Related reference
References
Related information
Adapters, Devices, and Cable Information for Multiple Bus Systems
Cabling a model 9406-520, 9406-525, or 9407-515 and the Hardware
Management Console (HMC)
Learn how to cable the expansion units, connect the external cables, power cords, and HMC cables, attach
devices, and route the cables after you install all of your hardware features or replace parts.
50 System i and System p: Cabling your server

IBM System i Specifications

General

Operating System	IBM i
Form Factor	Rackmount, Tower
Processor	POWER5, POWER6, POWER7, POWER8, POWER9
Security	encryption
Networking	Ethernet
Reliability	redundant components
CPU	POWER processors
Memory	Up to several terabytes depending on model